Product Overview
The MXR Iso-Brick Pro Power Supply delivers clean, steady voltages to a diverse range of pedal types in a sleek form factor so that you can confidently power your entire board without any extra bulk.
Every one of the MXR Iso-Brick Pro Power Supply’s ten outputs is fully isolated to preserve signal purity and cut out environmental noise. Catering to an array of power requirements, this unit offers six fixed outputs—two 9V DC at 500mA and four 9V DC at 300mA—and two switchable 9/12/18V DC outputs at 500mA. Even high-demand multi-effects units are covered, with a dedicated 9V DC output at 1.5A for units such as the Line 6 HX Effects processor and HX Stomp amp/processor.
Expanding your setup? The MXR Iso-Brick Pro Power Supply features a dedicated 18V DC link output at 2.0A so that you can seamlessly connect to a secondary power source such as the MXR Iso-Brick Power Supply or the MXR Iso-Brick Mini Power Supply. An IEC power input allows you to connect any standard IEC power cable, eliminating the need for an obnoxious wall wart. With its compact, lightweight design, the MXR Iso-Brick Pro Power Supply is perfectly sized to fit under most Pedaltrain pedalboards—and it comes with all the mounting brackets and screws you need to set it up.
The MXR Iso-Brick Pro Power Supply will keep your effects pedals running smoothly and quietly, and its slim-yet-robust construction allows you to keep space open for all of your favorite pedals—whether low-powered analog overdrives or high-powered digital multi-effects processors. Power up with the MXR Iso-Brick Pro Power Supply.
10 Total outputs, each fully isolated to reduce line noise:
- Four fixed outputs 9V DC @ 300mA
- Two fixed outputs 9V DC @ 500mA
- Two switchable 9/12/18V DC @ 500mA outputs
- One dedicated 9V DC @ 1.5A output for high-demand multi-FX units
- One dedicated 18V DC @ 2.0A output for power supply linking or powering a 18V pedal
Features:
- Delivers clean, steady voltages to a full range of pedal types
- Sleek form factor fits under most popular pedalboards
- Mounting brackets & screws included
- Power everything from low-current analog pedals to high-current multi-FX units
- 10 total outputs, each fully isolated to reduce line noise
- IEC power input eliminates inconvenience of wall warts
- Allows for the use of any standard IEC power cable
- UPC: 710137121744
- MPN: M242
Specifications:
- Input: 100–240V~ 50/60 Hz 1.5A
- Output: 42W MAX
- 9V 300mA (x4)
- 9V 500mA (x2)
- 9/12/18V 500mA (x2)
- 9V 1.5A (x1)
- 18V 2.0A (x1)
- Dimensions (inches): 9-1/4" (W) x 3-7/16" (D) x 1-7/16" (H)
- Weight: 0.84 kg / 1.9 lbs.
Warranty:
Dunlop Pedals and Electronics come with a 1-year manufacturer's warranty. Please register online at Dunlop or complete and return the enclosed warranty card to Dunlop within 14 days of original purchase. Dunlop will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Dunlop retailer such as ZoZo Music. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term.
