Electro-Harmonix EHX Triangle Big Muff Pi Fuzz / Distortion / Sustainer Effects Pedal

Electro-Harmonix has reissued the original EHX Version 1 Big Muff and it's dripping with vintage Electro-Harmonix DNA and tone. Dubbed the Triangle Big Muff because of the layout of its Volume, Sustain and Tone controls, this is the one that started it all. The new Triangle Big Muff is a faithful re-creation of the original circa 1969 circuit now housed in a pedalboard friendly, die-cast chassis.

Electro-Harmonix founder, Mike Matthews, says: "The Big Muff Pi is the pedal we are best known for so I wanted to commemorate EHX’s 50th Anniversary (1968-2018) by re-releasing V1, the very first Big Muff. Original pedals are now selling for hundreds of dollars and this reissue absolutely nails that creamy, violin-like sustain and musical tone at a price a working musician can afford."

The Triangle Big Muff features the following nods to convenience: an LED to indicate effect status, true bypass switching and the option of being powered by a 9-volt AC adapter.

Operation:

• Volume Control: Sets the output level
• Tone Control: Provides a range of sounds from high treble to deep bass. As you turn the knob clockwise the treble increases and bass decreases.
• Sustain Control: Adjusts the amount of sustain and distortion.
• Footswitch & Status LED: Use the footswitch to toggle between effect and bypass. The Triangle Big Muff is active when the LED is lit. When the LED is off, the pedal is in true bypass mode.
• In Jack: Plug the output of your instrument or another effects pedal into the 1/4" input jack. The input impedance presented at this jack is 122kΩ.
• Out Jack: Connect the Triangle Big Muff's 1/4" Out jack to the input of your amplifier or another effects pedal. When the Triangle Big Muff is in bypass mode, the Out jack is connected directly to the In jack. The output impedance is nominally 25kΩ.

Powering the Triangle Big Muff Pi:

The Triangle Big Muff Pi may be powered from a 9V battery or an optional 9VDC AC Adapter such as the EHX9.6DC-200 or any Boss® or Ibanez® style AC adapters capable of delivering at least 30mA. Plug the output of the adapter into the 9V power jack located at the top of the pedal. The battery may be left in or taken out when using an AC Adapter. The current draw is approximately 2.2mA at 9VDC. To change the 9V battery, remove the 4 screws on the bottom of the Triangle Big Muff Pi. Take off the bottom plate and change the battery. Avoid touching the circuit board while the bottom plate is off. Replace the bottom plate and screws.

Please Note: Using the wrong adapter or a plug with the wrong polarity may damage your Triangle Muff Pi and void the warranty.

Features:

• Electro-Harmonix EHX Triangle Big Muff Pi Fuzz/Distortion/Sustainer Pedal
• The authentic V1 Triangle Big Muff reissued in a nano-sized chassis
• Effect status LED
• True bypass
• Vintage look and graphics
• 9V Battery included
• Accepts optional EHX 9.6VDC-200mA power supply (not included)
• Current Draw: 2.2mA @ 9VDC
• Dimensions in inches: 2.75(w) x 4.5(l) x 2.1(h)
• Dimensions in mm: 70(w) x 115(l) x 54(h)
• UPC: 683274012162
• MPN: TRIBM